iPECS UCP
Feature Description and Operation Manual Issue 1.3
201
Operation
System
Conditions
Pause operation is automatic when encountered; see Station or System Speed Dial for
pause entry.
1. The timed pause is required and used only with analog CO Lines.
Programming
Related Features
Station Speed Dial
System Speed Dial
Hardware
2.73.3 Station Speed Dial
Description
You can store commonly dialed numbers for easy access using Station Speed Dial. With
iPECS UCP, your Station has access to 100 Speed Dial numbers each stored in a “bin”.
Each Speed Dial number can be up to 25 digits in length and may include special instruction
codes.
Special instruction codes available are:
‘*’ as 1st digit Activate Display Security, do not display number.
‘*’ not 1st digit Switch from Pulse to DTMF dialing
[DND] Insert a Flash command
Flash as 1st digit
Activate dial tone detect.
[MESSAGE/CALLBACK]as 1
st
digit Activate ISDN Keypad Facility
[MESSAGE/CALLBACK] Insert pause dialing command.
Your iPECS IP and LDP Phone may have a Flex button assigned for One-Touch access to a
specific Speed Dial number. In addition, you may assign a telephone number directly to a
Flex button on your iPECS IP and LDP Phone. In this case, the telephone number is
allocated to the highest numbered Station Speed Dial bin you have available.
To Next Page
Loading...
