iPECS UCP - 5.9 Flex Button Direct Speed Dial Assignment

iPECS UCP
Feature Description and Operation Manual Issue 1.3
347
5.9 Flex Button Direct Speed Dial Assignment
Description
You may program a telephone number directly to a Flex button without the need to assign the
number to a Speed Dial bin. In this case, the system automatically allocates the telephone
number to the highest numbered unused Station Speed Dial bin.
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To assign a telephone number to a Flex button
2. Press the desired Flex button.
3. Press the [TEL NUM]soft button or, for 24D and 24DH phones, press the [ICM]
button.
4. Press the outside Line button or dial the Line access code.
5. Dial the telephone number.
6. Press the [HOLD/SAVE] button.
7. Dial the name to be associated with the number (optional).
8. Press the [HOLD/SAVE] button.
1. Lift the handset or press the [SPEAKER] button.
To place a call to the assigned telephone number
2. Press the assigned Flex button.
Conditions
1. When a Flex button is assigned with a telephone number, the system will allocate
the number to the highest available Station Speed Dial bin. If no bin is available,
you receive error tone when attempting to assign the telephone number.
2. The telephone number may include any of the special Speed Dial instructions
([MESSAGE/CALLBACK], {FLASH], display security, etc.).
Programming
Related Features
 Station Speed Dial
Hardware
 iPECS IP and LDP Phone