iPECS UCP - 2.18.2 Group Call Pick-Up

iPECS UCP
Feature Description and Operation Manual Issue 1.3
59
Programming
SYSTEM DATA
RLP (Ringing Line Preference) Priority
Related Features
 Intercom Signaling Mode
 Ringing Line Preference
 Group Call Pick-Up
 Private Line
Hardware
2.18.2 Group Call Pick-Up
Description
You can answer (“Pick-Up”) incoming and transferred intercom and outside calls ringing at
another station in the same Station group. All ringing calls, except Private Line calls, queue
Callbacks and recalls from hold, are subject to Pick-Up by other stations in the same group.
iPECS IP and LDP Phone users may assign a Flex button as a {GROUP CALL PICK-UP}
button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “566” + [HOLD/SAVE]
To assign a {GROUP CALL PICK-UP} button
1. Lift the handset or press [SPEAKER] button.
To Pick-up a call ringing at another station
2. Dial “566”, the Group Call Pick-Up feature code.
Or,
Press the {GROUP CALL PICK-UP} button.
SLT
1. Lift the handset.
To Pick-up a call ringing at another station
2. Dial “566”, the Group Call Pick-Up code.
Conditions
1. To pick-up an outside call, you must have an idle appearance button available.
2. When several calls are ringing simultaneously, Call Pick-Up will connect the oldest