iPECS UCP
Feature Description and Operation Manual Issue 1.3
421
9.3 Mobile Native Voice Support for UCS Mobile client
Description
UCS mobile is an extension itself but UCS mobile client in a native voice mode has an
extension of the associated station.
UCS mobile client with a native voice can control 6 features like MEX On/Off, Voice Mail
forward On/Off and ACD On/Off by using a http. If UCS mobile client uses this feature, it must
be activated on the associated station.
In case of an inbound call, a caller makes a call to a internal station, which is associated with
UCS mobile client then a ring starts to the station and the mobile client. Then if UCS mobile
client get the call, the call will be connected through a Native Call (3G/LTE).
While conversation, UCS mobile user can search his or her UCS Mobile Client phonebook
and transfer the call to an internal user.
In case of an outbound call, a mobile client has two options : One is a call through mode and
the other is a native call mode.
A called party will receive the CID of the station in case of a call through mode, otherwise a
calling party will receive the CID of mobile phone number.
Operation
1. User can select each menu in the UCS client window.
To activate or deactivate features
2. Then the selected feature should be activated or deactivated on the associated
station.
1. While conversation using UCS client, user can search the desired station to transfer
in the mobile client phonebook.
To transfer a call
2. Transfer a call by selecting a transfer menu.
Conditions
1. Mobile client with native voice mode can send the associated station number and
password when registered. Then a personal group is configured by UCP system
automatically to support the presence of the associated station.
2. Otherwise, a system administrator should configure a personal group consisting of
mobile client and the associated station, a mater station. And also the Linked Pair
Mode attribute of PGM261should be set to ON.
Programming
To Next Page
Loading...
