iPECS UCP
Feature Description and Operation Manual Issue 1.3
88
2.30 Dialing Restrictions
2.30.1 Class of Service
Description
Dialing privileges can be assigned for each station, DISA line and Authorization Code. Dialing
privileges are assigned in “Allow” and “Deny” Exception tables that are associated with a
COS. The dialing privileges are the result of the interaction of the Station and CO Class of
Service (COS)assignments and Exception Tables as shown in the charts below. Users
placing an outgoing call or dialing after answering a call will be allowed the dialing privileges
assigned.
Station Class of Service – There are eleven (11) Station Class of Service assignments, which
also apply to DISA and Authorization Code users based on the assigned COS.
Station COS Dialing Restriction
1 No restrictions are placed on dialing.
2 Assignments in Exception Table A are monitored for allow and deny numbers.
3 Assignments in Exception Table B are monitored for allow and deny numbers.
4 Assignments in Exception Tables A & B are monitored for allow and deny numbers.
5
C apply.
6
Number of digits cannot exceed LD digit count and assignments in Exception Table C
apply.
7
Intercom and Emergency number calls are allowed. Incoming and transferred calls are
allowed.
8 Assignments in Exception Table D are monitored for allow and deny numbers.
9 Assignments in Exception Table E are monitored for allow and deny numbers.
10
The assignments in the Exception Table D & E are monitored for allow and deny
numbers.
11
The assignments in the Exception Table A & B and D & E are monitored for allow and
deny numbers.
CO Class of Service – There are five (5) CO line COS assignments.
COCOS Dialing Restriction
1 Dialing privileges are governed by the Station COS only.
Assignments in Exception Table A govern dialing privileges for Station COS 2 & 4.
3 Assignments in Exception Table B govern dialing privileges for Station COS 3 & 5.
4
No LD calls (LD code & digit count) and assignments of Exception
To Next Page
Loading...
