iPECS UCP
Feature Description and Operation Manual Issue 1.3
345
5.8 DND –One-Time DND
Description
While on a call, if you wish not to be interrupted by another call, pressing the DND button will
activate One-time DND. For the duration of the active call, your phone will be in DND. One-
time DND can be activated while you are on a call or receiving ring for a new call. In this
case, pressing the DND button will terminate the ringing and the call is routed based on the
following precedence:
Previous or active Call Forward busy.
Preset Call Forward busy.
Station Call Coverage.
Direct Transfer to Voice Mailbox.
Return busy signal and disconnect.
When you complete your active call, DND is cancelled and the [DND] LED is extinguished.
Operation
iPECS IP & LDP Phones
1. Press the [DND] button, the [DND] LED lights, station goes to DND state.
To activate One-Time DND while ringing
System
1. When the station returns to idle, DND is disabled and the [DND] LED extinguishes.
Deactivation
Conditions
1. Outside Line recalls will override One-Time DND.
2. Your station must be permitted DND to activate One-time DND.
3. A station cannot reject a call from the Attendant using One-time DND.
4. One-time DND is not available to the Attendant.
5. One Time DND cancels existing Callback queues.
Programming
STATION DATA Common Attributes DND, Call Forward
To Next Page
Loading...
