iPECS UCP - Page 356

iPECS UCP
Feature Description and Operation Manual Issue 1.3
344
- The call is acceptable if there is an appropriate CO-Individual or idle MSN-
LOOP or idle CO-Group or idle CO-LOOP or idle Unified-LOOP button.
- Via one of above buttons according to priority.
4) Making of internal call.
- In idle state, if dial a station number by dial pad.
 One of DSS button or Unified-LOOP button is seized automatically for
the call.
- Seize DSS button and dial : the DSS button is seized.
- Seize Unified-LOOP button and dial.
 If there is DSS button, the DSS button is seized.
Or, the pressed Unified-LOOP button is seized.
5) Making of internal call.
- In idle state, if dial CO-access-code and external number by dial pad.
 One of CO-Individual/CO-Group/CO-LOOP/Unified-LOOP button is
seized automatically for the call.
- Seize CO-Individual/CO-Group/CO-LOOP button and dial : the CO-
Individual/CO-Group/CO-LOOP button is seized.
- Seize Unified-LOOP button and dial.
 If there is CO-Individual/CO-Group/CO-LOOP button, the CO-
Individual/CO-Group/CO-LOOP button is seized.
Or, the pressed Unified-LOOP button is seized.
6) Auto-hold and auto-transfer are implemented also using previous DSS/CO-
Individual/CO-Group/CO-LOOP/MSN-LOOP buttons.
- On internal/external talking state, the call is transferred to the right-next
call of making by pressing of CO-Individual/CO-Group/CO-LOOP/MSN-
LOOP/Unified-LOOP
Programming
STATION DATA
CLI Attributes

Call Wait
CO LINE DATA
Analog Attributes

ICLID Ring Timer
SYSTEM DATA DID/DISA Destination
System Timers

DID/DISA No Answer Timer
Related Features
 Direct Inward System Access (DISA)
 Direct Inward Dial (DID)
 ICLID Call Routing
 Intercom (ICM) Call
Hardware
 iPECS IP or LDP Phone