iPECS UCP - 3.8 Intercom Tenancy Group

iPECS UCP
Feature Description and Operation Manual Issue 1.3
279
3.8 Intercom Tenancy Group
Description
Stations in the iPECS are assigned to an Intercom Tenancy Group, group 01 ~ 100. Stations
in a group are allowed or denied the ability to place intercom calls to stations in other groups
on a group-by-group basis.
Each Intercom Tenancy Group is assigned an Attendant station. All dial “0” calls from a
station in the group are routed to the assigned Attendant. In addition, the assigned Attendant
can control the Day/Night service mode for stations in the group switching from Day to Night
mode.
Each group is assigned a separate Auto Ring Mode Table (Weekly Time Table) to change
the Ring and COS (Class of Service) mode automatically during the day and night service
mode. In addition, DID calls to the system can route to a specified Tenancy group. By
defining the group as the destination in the Flexible DID Conversion Table calls will follow the
Tenancy Group Auto Ring Mode Table.
Operation
System
Conditions
Operation of Intercom Tenancy Groups is automatic when programmed.
1. Intercom calls from a station to a denied access Intercom Tenancy Group will
returner or tone.
2. Intercom Tenancy does not affect the Station Numbering Plan in the system. All
stations in the system must have different station numbers even if they are
assigned to different Intercom Tenancy groups.
3. The Attendant of a Tenancy Group can be any station in the system and it is not
affected by Tenancy Group access.
4. When the Attendant of an Intercom Tenancy Group sets Day/Night/Timed mode,
only that Tenancy Group is affected.
5. Calls to and from outside Lines are not affect by Intercom Tenancy. However; calls
cannot be transferred between groups if access is not allowed between the groups.
6. Intercom Tenancy Group 01 is the default or group 0 is the unassigned group.
7. Outside Lines can be configured for use by a specific Tenancy group only; stations
in other tenancy groups are not able to access the Line.
Programming
STATION DATA
Common Attributes  ICM Tenancy Group Number
Station ICM Tenancy Group