iPECS UCP - 3.4 Intercom Call Hold

iPECS UCP
Feature Description and Operation Manual Issue 1.3
275
3.4 Intercom Call Hold
Description
While on an active Intercom (ICM) callusing an iPECS IP or LDP Phone, you can place the
call on hold. The held station will receive the assigned Music-on-Hold. The call is placed on
Exclusive Hold and recalls you after expiration of the Exclusive Hold Recall Timer.
An [ICM] button must be assigned to the iPECS IP or LDP Phone.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM]+ “87” + [HOLD/SAVE]
To assign an [ICM] button
1. Press the [HOLD/SAVE] button, the {ICM}button LED will flash at the Exclusive
Hold rate.ICM dial tone is received.
To place an active ICM call on hold
1. Press the [ICM] button or the {DSS/BLF} button associated with the held station,
the{ICM}button LED illuminates and the ICM call connects.
To retrieve the held ICM call
Conditions
1. Multi-intercom call can be placed on hold at station. Press the [ICM], [HOLD]
button or the {DSS/BLF} button associated with the held station, the [ICM] button
LED illuminate and the ICM call connected by FIFO.
2. There is no limit of the number of held station.
Programming
Related Features
 MOH (Music-On-Hold)
 Intercom (ICM) Call
 Exclusive Hold
 Hold Recall
Hardware
 iPECS IP or LDP Phone