Related Features
Internal/External & All Call Page
Hardware
3.11.3 SOS Paging
Description
A System announcement can be recorded and then used as a page announcement. A Flex
button of an iPECS IP or LDP phone is required.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “Page Code” + System Announcement Number +
[HOLD/SAVE]
To assign a Flex button as a {SOS Page} button
1. Press the assigned {SOS Paging} Flexible button.
To activate SOS paging
Condition
1. This feature can be activated only by pressing the assigned Flexible button in the
idle state.
2. The System announcement for SOS Paging can be recorded only from an
Attendant station.
3. Paging zones include Internal, External and All Call page zones.
4. SOS paging is not restricted by the Paging timer. The entire SOS paging
announcement will play over the Page zones until complete even if the Paging
time out expires.
Programming
To Next Page
Loading...
