iPECS UCP
Feature Description and Operation Manual Issue 1.3
200
2.73 Speed Dial
2.73.1 Display Security
Description
Station and System Speed Dial numbers may be programmed so that the telephone number
digits are not displayed on the LCD of iPECS IP and LDP Phones when the Speed Dial is
selected.
Operation
1. Dial “*” as the first digit of the Speed Dial number.
To assign Display Security to a Speed Dial number
Conditions
1. The number is displayed when programming the Speed Dial number.
2. Display Security does not affect the SMDR output.
3. Display Security is provided on all outside calls including calls that are transferred
or recall.
4. An “*” in any digit position other than the first, will activate Pulse to Tone
Switchover.
Programming
Related Features
Dial Pulse to Tone Switchover
Speed Dial
Hardware
2.73.2 Speed Dial Pause Insertion
Description
A pause dialing command may be inserted in a Station or System Speed Dial number. When
encountered, the system will stop dialing the Speed Dial number for the assigned “pause”
duration. You can insert multiple pauses into a Speed Dial number. The pause feature is
often used to allow external network equipment time to connect and deliver dial tone.
To Next Page
Loading...
