iPECS UCP - 2.87.3 Remote Devices

iPECS UCP
Feature Description and Operation Manual Issue 1.3
268
 Holiday ring modes
 RTP relay
 RTP Relay group.
Operation
Conditions
Zone operation is automatic once configured.
1. Zone attributes which may affect ringing, such as Holiday and Vacation settings,
have lower priority than other ring assignments such as Tenancy group ring mode
established for DID lines.
2. Zone Attributes do not provide adjustment of time for DST.
3. It is recommended to assign outside Lines and stations of a Tenant group in the
same Device Zone.
4. Wake-Up time is based on the time displayed in the station’s LCD.
Programming
ZONE DATA Device Zone Number
Device Zone Attributes
Access & Page Relay
Zone Attributes
Zone RTP Relay Group
Inter-Zone Attributes
Zone Holiday Assignment
Related Features
Hardware
2.87.4 Zone Outgoing Call Connection Limit
Description
Every system has a limited number of outside Lines shared between all system users. The
number of outside Lines often is less than the number of users. When all the Lines are in use,
you may receive an All Trunks busy signal indicating no outside Lines are available.
To minimize this situation, outgoing outside calls from devices in a Zone can be limited from
one (1) to the maximum outside Line capacity of the system. As a default, the number of
outgoing calls for each Zone is not limited.