iPECS UCP - Voice Mailbox Settings

iPECS UCP
Feature Description and Operation Manual Issue 1.3
156
Conditions
1. The default Class of Service for all mailboxes is 1.
Programming
SYSTEM DATA
VM COS Attributes
Related Features
 Integrated Auto Attendant/Voice Mail
Hardware
2.46.3.18 Voice Mailbox Settings
Description
You can program the Mailbox settings for your mailbox including a security password and
record a greeting. When you press “8” while retrieving messages, the "Mailbox Setting"
prompt, (“To edit your greeting, press one, to edit your password, press two. To return to
main menu, press nine”) is played.
Operation
1. Press “8”, for Mailbox settings, the “Mailbox Setting” prompt is received.
To program Mailbox settings while “in” the Voice Mailbox
1. Dial “1” and receive the “Greeting Option” prompt (“To listen to your current
greeting, press five, To record a new greeting, press seven, To return to the main
menu, press nine.”).
To edit your greeting
2. Dial “5”, to hear your current greeting.
3. Dial “7” to record a new greeting (“At the tone, record your new greeting, press #
when you have finished”).
1. Dial “2” and receive the “Password Entry” prompt (“Please enter your new
password and press pound when finished.”).
To edit your password
2. Dial new password.
3. Press “#” and receive the “Reenter Password” prompt (“Please re-enter your
password to confirm and press pound when finished”).
4. Dial new password again.
5. Press “#” and receive “Password Confirmation” prompt (“Your password is saved”).
1. Dial “9” to return to the main VM menu.
To return to main menu