iPECS UCP - SLT Flash Mode

iPECS UCP
Feature Description and Operation Manual Issue 1.3
409
7.3 SLT Flash Mode
Description
When the SLT user momentarily presses the Hook-switch, a Flash is generated. The
operation of the Flash function can be configured to for the following operation:
 0: Flash Transfer - Flash detected, outside Line is held and dial tone is received.
 1: Flash Drop - Flash detected and outside Line is disconnected.
 2: Flash Ignore - Flash detected but Ignored.
 3: Hold Release - Flash detected, the outside Line is held and the dial tone is
received. If the SLT user goes on-hook, the held Line is disconnected.
Operation
Conditions
Programming
STATION DATA
Terminal Attributes

SLT Flash Mode
Related Features
 Call Transfer
 Hold
Hardware