iPECS UCP
Feature Description and Operation Manual Issue 1.3
420
9.2 Call Control with UC Client
Description
UC Client can call control with my favorite station number (Destination Station number : DSN).
There are two kinds of way. One is No voice(NV) Way and the other with voice(WV) Way
NV Method is that voice and call are happened in DSN. UC Client cannot speak with each
other. WV Method is that DSN and UC Client can talk alternate respectively.
Operation
System
1. UC Client should be registered in ADM 446.
Operation of Call Control is automatic when UC Client is logged in
2. User should set DSN password in UCP web ADM 227.
3. UC-Client user must set DSN and password(PWD) in setting before log in.
4. If UC Client logged in successfully with DSN and PWD, UC Client can control call of
DSN. NV can control simultaneously with DSN. WV can control DSN with IP Bridge
mode.
5. If user wants to change the DSN, system moves automatically it from the member of
previous P.G.
Conditions
1. UCP makes automatically Personal Group(P.G) when UC client log in first time
with DSN. Master is DSN and Member is UC-Client by default.
2. DSN and PWD is optional for WV. If it’s not added in WV, UC-Client is used stand-
alone.
3. If you want to change the Master and Member, you should set it in ADM 260
before log in. (This is modified after P2 1.1.8 or P1 1.0Di version. Master is UC
client and member is DSN in previous version.)
4. If DSN is already the member of other P.G, user cannot assign DSN for NV.
5. If UC Client is already the Master of other P.G, user cannot assign DSN for NV.
Programming
To Next Page
Loading...
