iPECS UCP - 1. INTRODUCTION; 1.1 Manual Application; 1.2 Manual Organization; 1.3 Feature Information

iPECS UCP
Feature Description and Operation Manual Issue 1.3
1
1. INTRODUCTION
1.1 Manual Application
This document provides detailed information covering description and operation of the
numerous features available in the iPECS UCP Release system software. The document is
written assuming the system employs the default-numbering plan for North America.
1.2 Manual Organization
Features are arranged alphabetically in nine (9)different major groupings as follows:
 Section 1 Introduction
 Section 2 System Features
 Section 3 Intercom Features
 Section 4 Outside (CO/IP)Lines
 Section 5 iPECS IP & LDP Phones
 Section 6 Attendant
 Section 7 SLT
 Section 8 SIP Extension
 Section 9 UCS Client
1.3 Feature Information
Each section is an alphabetical listing of features with the description and operation of each.
The structure is divided into 6 parts as below:
 Description: explains the nature of the feature.
 Operation: gives detailed step-by-step operation of the feature for Ericsson LG
phones (LDP digital and LIP IP phones)and SLTs. In some cases a Flexible
button on the Ericsson-LG Enterprise phones can be assigned to activate the
feature. In this case, the procedures to assign the button are provided.
 Conditions: explains known feature interactions and constraints related to the
feature.
 Programming: lists Web Admin database entries that may influence proper
feature operation.
 Related Features: lists related topical information to aid in understanding the
feature.
 Hardware: lists hardware required for proper feature operation.