iPECS UCP
Feature Description and Operation Manual Issue 1.3
352
5.13 Microphone Mute
Description
You can turn off the microphone of your iPECS IP or LDP Phone, which will stop audio
transmission from the handset, speakerphone or headset microphone, “Mic Mute”.
Operation
iPECS IP & LDP Phones
1. Press the [MUTE] button, the [MUTE] button LED is ON and the microphone
(Handset, Speakerphone, Headset) is muted; the connected party receives silence.
To Mute the Microphone
1. Press the illuminated [MUTE] button, the [MUTE] button LED is OFF, and the
microphone is activated, transmitting audio to the connected party.
To activate the microphone
Conditions
1. Changing from speakerphone to handset or vice versa during a mute condition
returns the microphone to an active status; your voice is transmitted to the
connected party.
2. Returning to idle or placing another outside Line or intercom call will change the
mute status to its normal active microphone condition.
Programming
STATION DATA Terminal Attributes Headset Ring, Speakerphone, E&MIC
To Next Page
Loading...
