iPECS UCP - 4.2 Caller ID Mode

iPECS UCP
Feature Description and Operation Manual Issue 1.3
300
4.2 Caller ID Mode
Description
The Caller ID signals for analog CO Lines varies from region to region. To support these
differences, each analog CO Line interface is assigned the type of Caller Id signal provided
from the CO Line. The Caller Id signal type can be configured as:
 FSK
 DTAS FSK
 DTMF
 Russia-CID
Operation
Conditions
Operation of this feature is either automatic (when programmed) or by Web Admin.
1. Caller Id is provided from analog CO Lines after the first ring signal. If the call is
answered prior to receipt of the Caller ID, Caller Id will not be received or displayed.
Programming
CO LINE DATA
CID/CPN Attributes

CID Mode
Related Features
 ICLID Call Routing
Hardware
 Analog CO Line