iPECS UCP - 2.61 Outside Call Redirect

iPECS UCP
Feature Description and Operation Manual Issue 1.3
181
2.61 Outside Call Redirect
Description
You can assign a Flex button of your iPECS IP or LDP Phone to send an incoming outside
call to a pre-defined destination such as the Attendant, Voice Mail, another Station, or Hunt
group without answering the call. Call Redirect acts as a one-time Call Forward.
Operation
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “58” + destination + [HOLD/SAVE]
To assign a Flex button for {Call Redirect}
iPECS IP & LDP Phones
1. Press the {Call Redirect} button; the call is redirected to the defined destination.
To activate Call Redirect while receiving an outside call
Conditions
1. Conditions and programming associated with Call Forward apply.
2. Only the ringing call will be redirected; the next incoming outside call is routed as
normal.
Programming
Related Features
Hardware
 iPECS IP or LDP Phone