iPECS UCP - 2.11 Auto Service Mode Control

iPECS UCP
Feature Description and Operation Manual Issue 1.3
46
2.11 Auto Service Mode Control
Description
The service mode defines different ring assignments, COS (Class of Service) and answering
privileges for the external network connections and Stations in the system based on the time-
of-day. The service mode can be controlled automatically through definitions in the Auto Ring
Mode Selection Table, which defines the time of day for the Day, Night and Timed shift
modes for each day of the week.
The Attendant may change the service mode selection from automatic to manual selecting
the Day, Night, timed or Scenario mode.
Operation
System
Conditions
Operation of this feature is automatic.
Programming
STATION DATA
Station COS
CO LINE DATA CO/IP Ring Assignment
Common Attributes

CO Line COS (Class of Service)
SYSTEM DATA DISA COS (Class of Service)
External Control Contact
PBX Access Codes
Attendant Assignment
SMDR Attributes  Long Distance Call Digit Counter, Long
Distance Code
TABLES DATA Toll Exception Table
Authorization Codes Table
Auto Ring Mode Table
Related Features
 Day/Night/Timed/Scenario Ring Mode
 Off-Hook Signaling
 Authorization Codes (Password)
 Direct Inward System Access (DISA)
 Day/Night/Timed/Scenario Ring Mode
 System Clock Set
 Outside Line Ring Assignment