iPECS UCP - 3.10 Message Wait;Call Back; 3.10.1 CLI Message Wait

iPECS UCP
Feature Description and Operation Manual Issue 1.3
283
3.10 Message Wait/Call Back
3.10.1 CLI Message Wait
Description
When your iPECS IP or LDP Phone with display receives an external call with Calling Line
Identification(CLI) and the call is abandoned (disconnects before answer), the system will
generate a CLI Message Wait (missed call) log with the Caller Identification, date and time.
You may access this CLI log with the [MSG] button to review and, if desired, return the call.
You may assign a {CLI MESSAGE WAIT} button with direct access to the CLI Message Wait
list. The button LED flashes at 30 ipm to indicate a CLI Message Wait.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “32” + [HOLD/SAVE]
To assign a {CLI MESSAGE WAIT} button
1. Press the [MSG] button, the LCD shows a summary of all types of messages
waiting.
To review CLI Messages
ICM MWI(000)
CLI MSG(002)
VSF MSG(000)
VMS MSG(001)
UMS MSG(000)
SMS(01)
BACKOK
2. Dial ‘2’ to select “CLI MSG”. The LCD displays the first CLI message details
including the Caller Id, time and number of missed calls from the caller.
3. Use the [VOL UP]/[VOL DOWN]or the Navigation Up/Down buttons to scroll
through the missed call list.
5551122323
21/11 09:10 CNT: 2
BACK SELECT> ANSWER
1. Press SELECT>, and choose DEL CUR.
To delete the current CLI Message