iPECS UCP - 3.6 Intercom Lock-Out

iPECS UCP
Feature Description and Operation Manual Issue 1.3
277
3.6 Intercom Lock-Out
Description
If you take no action after going off-hook for the Dial Tone timer or fail to dial an additional
digit within the Inter-digit timer, you will receive error tone for 30 seconds and be placed out-
of-service (locked-out). The LED of associated {DSS/BLF} buttons as well as the
{ICM}button on your phone, if configured, flutters rapidly to indicate the out-of-service state.
For iPECS IP & LDP Phone users, if the [SPEAKER] is used, the station will receive error
tone for 30second and then automatically return to idle and will not “Lock-out”.
Operation
System
Conditions
Operation of Intercom Lockout is automatic based on the Dial Tone & Inter-digit timers.
1. If the station is assigned Howler Tone, error tone is presented for about 2 seconds
followed by 30 seconds of Howler tone followed by lockout and silence.
2. To release the lock-out, simply hang-up.
Programming
STATION DATA
Terminal Attributes

Howler Tone
SYSTEM DATA
System Timers

ICM Dial Tone Timer, Inter Digit Timer
Related Features
 Intercom (ICM) Call
Hardware