iPECS UCP - 1.4 Buttons &Term Variations

iPECS UCP
Feature Description and Operation Manual Issue 1.3
2
1.4 Buttons &Term Variations
iPECS UCP supports proprietary digital and IP phones. The proprietary models include LDP-
7000 series, LDP-9000 series, LIP- 7000 series, LIP-8000/8000E series and LIP-9000 series.
Each series employs similar but slightly different designations for the buttons. Details of the
buttons on your phone are provided in the User Guide. For the purposes of this manual,
several of the designations may be used. For example, the button to handle messages is
called either [MSG], [CALL BK], or [MESSAGE/CALLBACK].
Note the fixed button names are enclosed in brackets ‘[ ]’ and Flex buttons are enclosed in
braces ‘{ }’. In addition, some buttons have dual functions; the [HOLD/SAVE] button
places your active call on hold and stores entries you make when assigning Flex buttons.
The description, operation and conditions attempt to use common terms such as “Voice Mail”
or “outside Line” so that a novice installer can understand the contents. The Programming
and Hardware sections however employ terms specific to the UCP as used in the respective
manual such as “VSF” (used for Auto Attendant and Voice Mail) and “CO/IP Lines” for
Outside Lines.
Note the feature code is based on
Flexible numbering plan 1
in Operation part. First check
your numbering plan ‘System ID (100)’ and for the detailed feature code about the numbering
plan, refer to Appendix B on Administration & Programming manual.