iPECS UCP - 2.4 Authorization Codes (Password)

iPECS UCP
Feature Description and Operation Manual Issue 1.3
8
2.4 Authorization Codes (Password)
Description
Authorization Codes provide a means to control access to Voice Mail, Off Premise Call
Forward, Walking COS (Class of Service), or DISA and may be required for outgoing outside
Line or LCR access based on configuration of the system database. When you dial an
Authorization Code that matches an Authorization Code stored in the database, the system
invokes the Station COS (Class of Service) or the COS (Class of Service)assigned to
Authorization code. Each Authorization code has separate Day/Night mode COS (Class of
Service)assignments.
There are two types of Authorization Codes, Station and System. A Station Authorization
Code is specifically related to a given station and intended for a single user. The System
Authorization Codes are intended for use by any station in the system.
The Station Authorization Codes includes the associated station number and the assigned
code. The structure of the System Authorization code can be set as either “*”, or “*” the
Authorization Table index and the code digits. The later allows duplicate codes to be
employed by using the table index to provide a unique identification of the entry.
The Administrator and Attendants are permitted to assign any Authorization code including
codes for another station. Normal users may only assign the Station Authorization code for
the specific station.
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To assign your Station Authorization Code
2. Dial “33”, the Authorization Program Code.
3. Dial the Station number.
4. Dial the Authorization Code (1 to 12 digits).
5. Press the [HOLD/SAVE] button.
1. Dial the Station number for the Station Authorization code or, for a System
Authorization Code, dial “*” or “*” and the Authorization Table index.
To enter your Authorization Code when second dial tone is received
2. Dial the corresponding Authorization Code.
3. Place your call as normal.
SLT
1. Lift the handset.
To assign your Station Authorization code
2. Dial SLT Program Mode Entry code “561”.
3. Dial Authorization Program Code “33”.