iPECS UCP - 2.30.4 Walking COS (Class of Service)

iPECS UCP
Feature Description and Operation Manual Issue 1.3
93
3. Dial the Station range. If only one Station is to be assigned Temp COS, dial that
Station number twice.
4. Press the [HOLD/SAVE] button.
Conditions
1. When the COS of a Station is restored the Station COS is changed to the COS
assigned for the active service mode, Day, Night, or Timed.
Programming
STATION DATA
Station COS (Class of Service)
CO LINE DATA
Common Attributes

CO Line COS (Class of Service)
SYSTEM DATA DISA COS (Class of Service)
PBX Access Codes
SMDR Attributes Long Distance Call Digit Counter, Long
Distance Call Code
TABLES DATA Toll Exception Tables
Station/System Authorization Codes Table
Related Features
 Class of Service
 Walking COS (Class of Service)
 Auto Service Mode Control
 Day/Night/Timed/Scenario Ring Mode
 Authorization Codes (Password)
Hardware
2.30.4 Walking COS (Class of Service)
Description
You may temporarily override the toll restriction of a Station to make outside toll calls from a
normally toll restricted Station. You must input an Authorization Code in order to activate
Walking COS (Class of Service) and are subject to the COS of the Authorization Code. The
COS associated with the Authorization Code is applied for the next call.
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To activate Walking COS