iPECS UCP - Page 106

iPECS UCP
Feature Description and Operation Manual Issue 1.3
94
2. Dial “23”, the Walking COS code.
3. Dial the Station number and Authorization code, “*” and System Authorization
code or“*”, the code index and System Authorization code.
4. Place your call as normal.
SLT
1. Momentarily press the hook-switch.
To activate Walking COS
2. Dial “561”, the SLT Programming code.
3. Dial “23”, the Walking COS code.
4. Dial the Station number and Authorization code, “*” and System Authorization
code or“*”, the code index and System Authorization code.
5. Place your call as normal.
Conditions
1. The Station COS applied for Walking COS is the COS of the Authorization code
entered.
2. Walking COS applies the COS for only one call. Terminating the call returns the
station to the assigned Station COS. The user may reactivate Walking COS to
place another call or use Flash to maintain the Walking COS.
3. Use of Authorization codes varies based on the Country Code assigned in the
system database. In some regions, particularly the US and UK, a System
Authorization code may be required for DISA access. Entering a Station code on a
DISA line will fail in these areas. In other regions, a System Authorization code can
be used with Walking COS.
Programming
STATION DATA
Station COS (Class of Service)
CO LINE DATA
Common Attributes

CO Line COS (Class of Service)
SYSTEM DATA DISA COS (Class of Service)
PBX Access Codes
SMDR Attributes  Long Distance Call Digit Counter, Long
Distance Call Code
TABLES DATA Toll Exception Tables
Station/System Authorization Codes Table
Related Features
 Class of Service
 Auto Service Mode Control
 Day/Night/Timed/Scenario Ring Mode
 Authorization Codes (Password)
Hardware