iPECS UCP
Feature Description and Operation Manual Issue 1.3
199
2.72 Ringing Line Preference
Description
When Ringing Line Preference is enabled, you can answer calls ringing at your phone by
lifting the handset or pressing the[SPEAKER] button. You may select a Line before lifting the
handset or pressing the [SPEAKER] button, which will override Ringing Line Preference and
connect you to the Line you selected.
Operation
iPECS IP & LDP Phones
1. Lift the handset or press the [SPEAKER] button.
To answer a call while the station is ringing
Conditions
1. When multiple calls are ringing at your Station, a priority defines the order in which
calls are answered. The default priority is Transfer > recalls > incoming calls >
queued calls.
2. Intercom calls are always given the lowest answering priority.
3. Ringing Line Preference overrides Prime Line assignment.
4. SLTs operate only in the RLP mode; when ringing, lifting the handset connects the
SLT to the ringing call.
Programming
STATION DATA Terminal Attributes Auto Speaker Selection
To Next Page
Loading...
