iPECS UCP
Feature Description and Operation Manual Issue 1.3
383
6.4 Attendant Positions
Description
The iPECS UCP system has the capacity for 50 Attendants (1 System Attendant/49 Main
Attendants). Attendants have enhanced call and control capabilities and are designated to
receive dial ’0’ calls from other users.
There are two different types of Attendant as follows,
System Attendant - The first station in the Attendant Group. In addition to Main
Attendant features, the System Attendant is commonly used for System Attendant
Programming, Admin Programming and Day/Night/Timed Mode control.
Main Attendant – Attendant group stations other than the first station of the
Attendant Group.
Operation
Condition
1. As a default, the first Attendant (System Attendant) is assigned as Station 1000
(logical number), and others are not assigned. In the UCP, the first digital phone
port is designated as the System Attendant and is Station number 1000.
2. Attendant calls (dialing “0”) and recalls are routed to first available attendant.
Programming
To Next Page
Loading...
