iPECS UCP - Announce Only Mailbox; Call Forward from VM

iPECS UCP
Feature Description and Operation Manual Issue 1.3
138
2.46.3.2 Announce Only Mailbox
Description
A mailbox can be configured to provide an announcement only and not provide incoming
message storage. After the announcement is played, the call is disconnected or returned to
the previous announcement.
Operation
Conditions
Operation of an Announce Only Mailbox is automatic once configured.
1. There is no limit to the number of mailboxes that can be assigned as Announce
only.
Programming
STATION DATA VM Attributes Announce Only Mailbox, Announce Only
Option
Related Features
 Integrated Auto Attendant/Voice Mail
Hardware
2.46.3.3 Call Forward from VM
Description
If you are at a remote location and accessing the integrated Voice Mail using CO/IP lines, you
can activate or deactivate Unconditional Call Forward from the integrated Voice Mail.
Pressing “7” at the main Voice Mail menu will return the "Mailbox Set Forward" prompt.
Operation
1. Press “7”, for Mailbox set forward, the “Mailbox Set Forward” prompt is received.
To activate Call Forward while in the VM
2. Dial “1” and receive the “Forward” prompt (“Please enter the number to forward
to ...").
3. Dial Station Number as follows:
a. To forward to another station, dial the station number.
b. To forward calls Off-Net, dial “*” and enter the station speed number.
11. The confirmation announcement “forwarded to station (‘xxx’)” or “forwarded to
speed bin number (yyyy)” is played.