iPECS UCP - 5.15 On-Hook Dialing

iPECS UCP
Feature Description and Operation Manual Issue 1.3
354
5.15 On-Hook Dialing
Description
Using your iPECS IP or LDP Phone equipped with a Speakerphone, you can place as well as
receive calls while the handset is on-hook.
With Automatic Speaker Select, you need not press the speaker button to initiate a call,
simply dial the number or press a button to activate the Speakerphone automatically.
Operation
iPECS IP & LDP Phones
1. Place desired call (dial station ICM number, select a Line and dial, etc.) the
[SPEAKER] button LED lights and the call is processed.
To activate On-Hook Dialing
Conditions
1. When you place a call in using On-hook dialing, you activate the Speakerphone
and, you must press the illuminated [SPEAKER] button to return to idle.
2. When the speakerphone is used, the microphone is active unless the [MUTE]
button is pressed and the [MUTE] button LED is ON.
Programming
STATION DATA
Terminal Attributes

Auto Speaker Selection
Related Features
 Mute
 Speakerphone
 Automatic Speaker Select
 Headset Compatibility
 Group Listening
Hardware
 iPECS IP or LDP Phone