iPECS UCP
Feature Description and Operation Manual Issue 1.3
390
6.8 Call Forward, Attendant
Description
As with other stations, Attendants can forward calls to other stations in the system. Calls may
be forwarded unconditionally, on busy or no answer.
Operation
Attendant
1. Lift the handset or press the [SPEAKER] button to receive intercom dial tone.
To activate Call Forward
2. Press the [FWD] button.
3. Dial ‘0’ ~ ‘5’, the Call Forward type.
4. Dial the station number to receive forward calls.
1. While idle, press the [FWD] button.
To deactivate Call Forward
Or,
1. While Off-hook, press the [FWD] button.
2. Dial ‘#’.
Condition
1. The Conditions of the Call Forward feature apply.
2. If the System Attendant activates Unconditional Call Forward, the receiving station
will receive Attendant calls and recall ring. In addition, if the receiving station is an
iPECS IP or LDP Multi-button Phone, the receiving station will be able to activate
features normally reserved for a Main Attendant.
3. The system requires at least one Attendant be available at all times. The last
available Attendant cannot activate Call Forward to an Attendant that has activated
the Alternate Attendant feature.
Programming
STATION DATA Common Assignment Call Forward
To Next Page
Loading...
