iPECS UCP
Feature Description and Operation Manual Issue 1.3
237
4. When you receive Call Back ring, the system dedicates a network path for your
call. You must answer your Call Back ring prior to the expiration of the Network
Transfer Recall Timer or, the Call Back is cancelled..
5. There are two methods to provide Net Call Back, connection mode and
connectionless mode based on the Net CC Retain Mode.
Programming
NETWORKING DATA Net Basic AttributesNet CC Retain Mode, Net Trans Recall
timer
Net CO Line Attributes
Related Features
Call Transfer, Station
Net Call Transfer
Hardware
2.80.2.5 Net Call Camp-On (Call Offer)
Description
When calling to a networked station that is busy, you may camp a call on to the called station.
The called station receives a camp-on tone and the [Hold/Save] button LED will flash.
Network Camp-on operation is the same as system Camp-on and is subject to the same
conditions.
From a network perspective, iPECS UCP employs H.450 Call Offer protocol to provide camp-
on capabilities.
Operation
iPECS IP & LDP Phones
1. Dial a busy station number and receive busy tone.
To activate Call Offer
2. Press the [CAMP ON] button or “*”.
3. The busy station receives off-hook muted ring.
4. The calling station hears a ring-back tone.
1. Press the flashing CO line button while receiving muted ring.
To answer the Call Offer
Or,
2. Hang-up and receive normal ring.
3. Lift the handset or press the [SPEAKER] button.
To Next Page
Loading...
