iPECS UCP - Off-Hook Signaling

iPECS UCP
Feature Description and Operation Manual Issue 1.3
353
5.14 Off-Hook Signaling
Description
When you receive a call while you are on an active call, you will receive the assigned Off-
hook signals. For ICM calls, a Camp-On, Voice-Over Announcement or Off-hook ring signal
may be received. For outside calls, you will receive a muted ring or a single tone burst. This
signal is delivered to the iPECS IP or LDP Phone speaker. SLTs will only receive camp-on
tones.
Operation
System
Conditions
Operation of Off-hook ring signals is automatically controlled.
1. While using the speakerphone, a Camp-On tone is provided over the speaker in
place of the assigned Off-hook ring Signal.
2. Activating DND or One-Time DND places the station in DND, terminating any Off-
hook signaling.
3. Off-hook ring signals terminate when the call forwards, or is answered or
abandoned.
4. A station, which is receiving Off-hook ring signals, will receive normal ring upon
return to idle status.
Programming
CO LINE DATA
CO/IP Ring Assignment
STATION DATA
Common Attributes

Off-Hook Ring Type
SYSTEM DATA
System Attributes

Off-Hook Ring Type
Related Features
 Call Waiting/Camp-On
 Outside Line Ring Assignment
 DND (Do Not Disturb)
 DND –One-Time DND
Hardware
 iPECS IP or LDP Phone