iPECS UCP - 3.7 Intercom Step Call

iPECS UCP
Feature Description and Operation Manual Issue 1.3
278
3.7 Intercom Step Call
Description
When busy tone is received on a dialed Intercom call, you may place a call to another station
by dialing the last digit of the station number. The system replaces the last digit of the
previously dialed busy station with the dialed digit and places an Intercom call to the new
station number.
Operation
iPECS IP & LDP Phones
1. Dial a digit other than the last digit of the busy station’s intercom number.
To activate step call, while receiving busy on a dialed Intercom call
Conditions
1. If the user dials the last digit of the busy station, Camp-On will be activated.
2. After receiving busy tone, if the user takes no action for the Busy Tone timer,
7seconds, the system will start the Intercom Lockout procedure.
Programming
Related Features
 Intercom Lock-Out
 Intercom (ICM) Call
Hardware
 iPECS IP or LDP Phone