iPECS UCP
Feature Description and Operation Manual Issue 1.3
289
1. Dial “#”.
To delete an SMS messages
DELETE MESSAGE?
YES : 1 NO : 2 ALL:3
2. Dial “1” to delete the current message, “2” to return to idle or “3” to delete all
received SMS messages.
Conditions
1. The system can store up to ten (10) received SMS messages and one (1) sent
SMS message for a station.
2. Once the received message storage capacity is reached, additional incoming SMS
messages are ignored.
3. For operation with the WLAN Phone, DECT Phone or UCS Client, refer to the
respective User Guide.
Programming
Related Features
Hardware
iPECS IP orLDP Phone w/Display
iPECS WLAN Phone
iPECS UCS Client
3.10.4 Station Message Wait/Call Back
Description
When a called station does not answer or is in DND, you can activate a Station Message
Wait indication to request a Call Back. A station may receive a Message Wait from any
number of other stations in the system. The station receiving the Message Wait can return
the calls using the [MESSAGE/CALL BACK] button.
When a busy station is called, you may request to be placed in a queue to receive a Call
Back. When the called station returns to idle, the system notifies you with Callback ring.
When you answer, the previously busy station is called.
When a Message is waiting, the [MESSAGE/CALL BACK] button LED of iPECS IP or LDP
Phones flashes and, for properly equipped SLTs, the MW Lamp will flash.
Operation
iPECS IP & LDP Phones
1. Press the [MESSAGE/CALL BACK] button, confirmation tone received.
To leave a Message Wait, while receiving ring back tone or no response on a call
announce
2. Hang up, Message Wait activated.
To Next Page
Loading...
