iPECS UCP - Page 300

iPECS UCP
Feature Description and Operation Manual Issue 1.3
288
5. Dial the message using two digits for each character as shown in the table below,
use the [REDIAL] button to delete a character.
1
Q – 11
Z – 12
. – 13
1 – 10
2
A - 21
B - 22
C - 23
2 - 20
3
D - 31
E - 32
F - 33
3 - 30
4
G – 41
H - 42
I - 43
4 - 40
5
J - 51
K - 52
L - 53
5 - 50
6
M - 61
N - 62
O - 63
6 - 60
7
P - 71
R - 72
S - 73
Q - 7*
7 - 70
8
T - 81
U - 82
V - 83
8 - 80
9
W - 91
X - 92
Y - 93
Z - 9#
9 - 90
*
Blank - *1
: - *2
, - *3
0
0-00
#
#
6. Press the [HOLD/SAVE] button to send and store the message or “#” to cancel.
1. Press [MSG] or [CALLBACK] button. The message contents summary will be
shown as below.
To retrieve an SMS Messages
ST CL VS VM FS MS
001 001 005 006 001 004
2. Dial “6” to select MS, SMS message wait.
“1” = ST: Station Message wait
“2” = CL: CLI Message wait
“3” = VS: Integrated Voice message wait
“4” = VM: external Voice Mail
“5” = FS: Feature server
“6” = MS: SMS message wait
The display shows the first line of received SMS messages.
MESSAGE: [0] EMERGENCY CONFER
[1] LETS GO TO LUNCH
3. Use the [VOL UP]/[VOL DOWN] to scroll through messages.
MESSAGE: [2] WE HAVE A MEETING A
[3] CONFERENCE AT 9 AM
4. Dial the message number (“01”~“10”) to view the entire message, use the [VOL
UP]/[VOL DOWN] to view each line of the message.
MESSAGE:> WE HAVE A MEETING AT
>7PM IF YOU CAN NOT MAKE IT