iPECS UCP
Feature Description and Operation Manual Issue 1.3
265
2.86 Web Call Back
Description
The Station User Web portal incorporates a Web Call Back feature. In the portal, you may be
permitted to request the system to establish a telephone call between two telephone
numbers. The call is subject to the dialing restrictions of the station number associated with
the portal access. An SMDR record is generated with the station number that accessed the
portal identified.
Operation
1. Access your Station Web portal and select the Call Back menu.
To activate Web Call Back
2. Enter the “to” and “from” telephone numbers.
3. Press Call button. The page will update to indicate success or failure of the call.
Conditions
1. Web Call Back must be enabled in your Station’s attribute assignments, Station
Data Common Attributes Mobile(Web) Client Service.
2. You will receive an error message if any of the following occur:
Call Back is disabled
The outgoing call is restricted due to your COS
No outside Line is available
Programming
To Next Page
Loading...
