iPECS UCP
Feature Description and Operation Manual Issue 1.3
238
Conditions
1. Call Offer is only applied to a station that is in talking state.
2. If the busy party is in a conference or paging, Call offer is not available.
3. The system does not support the path reservation mode defined in the QSIG
specification.
Programming
Related Features
Call Waiting/Camp-On
Hardware
2.80.2.6 Net Conference
Description
You can join stations and outside Lines from other networked systems to a conference call
with other stations or CO lines.
Operation
iPECS IP & LDP Phones
1. Establish the first call.
To establish an ad-hoc conference
2. Press the [CONF] button. The LED will light, the connected party is placed on
exclusive hold and you receive dial tone.
3. Place the second call.
4. When connected, press [CONF], the new call is placed on exclusive hold.
5. Repeat Steps 3 and 4 above to add additional conference parties.
6. Press the [CONF] button to establish conference.
1. Press the [HOLD/SAVE] button, the [CONF] button LED will flash.
To place a conference on hold
1. Press the flashing [CONF] button, all parties reconnected.
To retrieve held conference
SLT
1. Establish the first call.
To establish an 3-party conference
2. Momentarily press the hook-switch, the connected party is placed on exclusive
To Next Page
Loading...
