iPECS UCP - 2.77 SMDR (Station Message Detail Recording); 2.77.1 Call Cost Display

iPECS UCP
Feature Description and Operation Manual Issue 1.3
206
3. All Speed Dial numbers are stored in memory protected from power loss.
4. For iPECS IP and LDP phones, a call placed with Speed Dial will appear under the
Flex button assigned for the Line, Line Group, or the general Line appearance
{LOOP} button, as appropriate for the station Flex button configuration.
5. The user may pre-select an outside Line for a Speed Dial number, overriding the
assignment in the Speed Dial bin.
6. A name can be entered for a Speed Dial number to permit access from the Dial-
by-Name directory.
7. If a Speed Dial number contains a “Dial Tone Detect” command (Flash as the first
entry) and dial tone detect is enabled for the Line, the system must detect dial tone
before dialing the Speed Dial number.
Programming
STATION DATA
Common Attributes

Speed Dial Access
SYSTEM DATA
System Attributes

CO Dial Tone Detect
TABLES DATA
System Speed Zone
Related Features
 CO Line Flash
 Dial-by-Name
 Display Security
 Keypad Facility
 LNR (Last Number Redial)
 Dial Pulse to Tone Switchover
 Save Number Redial (SNR)
 Speed Dial Pause Insertion
 System Speed Dial
 System Speed Zone (Groups)
Hardware
2.73.5 System Speed Zone (Groups)
Description
System Speed Dial bins can be divided into zones or groups. iPECS UCP systems have 50
Speed Dial Zones available. To access a Speed Dial Bin assigned to a zone, the station must
be allowed access to the Speed Dial Zone.
Each zone can be assigned to apply COS (Class of Service) dialing restrictions to the Speed
Dial numbers in the zone. When assigned, the system will apply the Station and Line COS