iPECS UCP
Feature Description and Operation Manual Issue 1.3
205
1. Lift handset or press the [SPEAKER] button.
To dial using a System Speed Dial using a [SPEED] button
2. Press the [SPEED] button.
3. Dial the desired bin number(“20000”-“31999”)
1. Press the [DIR] soft button.
To dial a System Speed Dial number using an LIP-8000/8000E/9000 series phone with3-
soft buttons
2. Press the [SPEED] soft button.
3. Dial the desired bin number (“20000”-“31999”)
SLT
1. Lift handset.
To dial using a System Speed Dial
2. Dial “558”, the SLT Speed Dial access code.
3. Dial the desired bin number (“20000”-“31999”)
Attendant
1. Press the [TRANS/PGM] button.
To program a System Speed Dial number
2. Press the [SPEED] button.
3. Dial the Speed Dial bin number (“20000”-“31999”).
4. Press the Line button or dial the Line access code.
5. Dial the number to be stored.
6. Press the [HOLD/SAVE] button.
7. If desired, enter a name, see alphanumeric entry chart under Station Speed Dial.
8. Press the [HOLD/SAVE] button.
1. Press the [DIR] soft button.
To enter a Station Speed Dial number using an LIP-8000/8000E/9000 series phone with 3-
soft buttons
2. Press the [SPEED] soft button.
3. Press the [ADD] soft button.
4. Dial the Speed Dial bin number(“20000”-“31999”).
5. Press the Line button or dial the Line access code.
6. Dial the number to be stored.
7. Press the [HOLD/SAVE] button.
8. If desired, enter a name, see alphanumeric entry chart under Station Speed Dial.
9. Press the [HOLD/SAVE] button.
Conditions
1. Accessing an empty Speed Dial bin will return error tone.
2. A Speed Dial number uses a specific Line/or Line from a group assigned in the
Speed Dial bin. If the assigned Line is busy, a Line from the same group will be
selected. If all Lines in the group are busy, the user may queue for the next
available Line.
To Next Page
Loading...
