iPECS UCP
Feature Description and Operation Manual Issue 1.3
395
6.11 DSS/BLF Consoles
Description
Two types of DSS/BLF Consoles are available and can be used with an Attendant station
Serial Consoles and standard Consoles. For details on the Serial console operation, refer to
section 5.20.
The system allows an unlimited number of standard DSS/BLF Consoles LIP-8040LSS to be
installed in the system. Up to nine(9) standard DSS Consoles may be associated with a
station connected to an iPECS UCP. However, the maximum of DSS consoles may be
different according to the models of phone. Each button on the console can be assigned as
an outside Line, DSS/BLF or feature button.
For ease of programming, each console is assigned to a button “Map” in the system
database. The Administrator or user may then change individual Flex buttons as desired.
Operation of the DSS/BLF Console Flex buttons is the same as Flex buttons on the iPECS IP
and LDP Phones.
Operation
Conditions
1. Each standard DSS Console is assigned to operate in connection with a specific
station.
2. There is no limit to the number of standard DSS Consoles in a system beyond the
basic system capacities. The DSS Console employs a station number in the
system.
3. Assignments for the DSS button Maps are detailed in the below. Note that the
individual button assignments can be changed as with the iPECS IP and LDP
Phone Flex buttons.
To Next Page
Loading...
