iPECS UCP - 4.19 Outside Line Preset Forward

iPECS UCP
Feature Description and Operation Manual Issue 1.3
328
4.19 Outside Line Preset Forward
Description
Each outside Line can be assigned a Ring-No-Answer Preset Forward destination. An
incoming call on the Line will be routed to the defined Forward destination. At expiration of
the Preset Forward timer, the call forwards to the defined Preset Forward destination, which
is an index to the ICLID Ring Assignment Table.
The destination can be a station or station group including an adjunct Voice Mail. When the
call forwards to an adjunct Voice Mail group, a predefined Voice Mail Id (VMID) is sent to the
VM system to identify the Mailbox to receive the call.
Operation
System
Conditions
Operation of this feature is automatic.
1. Outside Line Preset Forward is disabled for calls initially routed to a station group.
2. Outside Line Preset Forward will override Call Forward No-Answer at a station.
3. Outside Line Preset Forward is disabled if the Preset Forward Timer is set to 0.
4. The outside Line Preset Forward destination cannot be the integrated Voice Mail
group.
Programming
CO LINE DATA CO/IP Preset FWD Attributes Preset FWD Timer, Preset
ICLID Ring Table Index, Preset VMID Digit
ISDN LINE DATA
ICLID Ring Assignment
Related Features
 Call Forward
 ICLID Call Routing
Hardware