iPECS UCP
Feature Description and Operation Manual Issue 1.3
13
2.6 Auto Call Release
Description
Outside or intercom calls (except Hands-free Answerback), will be released automatically if
you do not complete dialing or, for intercom calls, the called party does not answer after a
pre-determined time. Also, the call (internal or outside) will be released if the time between
dialed digits exceeds the Inter-digit Timer.
Operation
System
1. If you place an intercom call and the called station does not answer in the Intercom
Call Release Time, the call is terminated and you will receive error tone. In addition, if
the Inter-digit Timer expires while dialing, the call is terminated and you will receive
error tone.
Auto Call Release of Intercom calls
1. If you seize an idle Line and do not dial within the Automatic CO Release Timer, the
call is terminated and you will receive error tone. In addition, if the Inter-digit Timer
expires while dialing, the call is terminated and you will receive error tone.
Auto Call Release of outside calls
Conditions
1. If the Automatic CO Release Timer is set to “0”, Auto Call Release is disabled.
2. When the handset is used to place a call, you will receive error tone for several
seconds followed by 30 seconds of Howler tone and the station is placed out-of-
service. If on-hook dialing is used, you receive error tone for one (1) second and
the phone returns to idle automatically.
Programming
To Next Page
Loading...
