iPECS UCP
Feature Description and Operation Manual Issue 1.3
107
2.36.4 Emergency Mailbox
Description
When a station makes an Emergency call or the Threat History button pressed, the call can
be recorded. If a station number is assigned as the Emergency Mailbox Station in System
Attributes, the emergency call will be recorded to built-in Mailbox of the station.
All stations with an {Emergency Mailbox} button are notified of the recording and can
access the Mailbox using the button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + Built-in VM Group number + Station Number +
[HOLD/SAVE]]
To assign a{Emergency Mailbox} button
1. Press the flashing {Emergency Mailbox} button.
To listen to the Emergency Mailbox recording
2. Follow the normal Voice Mail procedures to listen to the Mailbox recordings.
Conditions
1. VSF/UVM must be installed and the VSF VM Station Group assigned in the UCP
system for recording to the Emergency Mailbox Station.
Programming
To Next Page
Loading...
