iPECS UCP - System Speed Dial

iPECS UCP
Feature Description and Operation Manual Issue 1.3
204
Related Features
 CO Line Flash
 Dial-by-Name
 Display Security
 Keypad Facility
 LNR (Last Number Redial)
 Dial Pulse to Tone Switchover
 Save Number Redial (SNR)
 Speed Dial Pause Insertion
 System Speed Dial
 Flex Button Direct Speed Dial Assignment
Hardware
2.73.4 System Speed Dial
Description
Commonly dialed numbers can be stored by the System Attendant or by the Administrator in
Web Admin for easy access by stations allowed use of System Speed Dial bins. With iPECS
UCP up to 12,000 System Speed Dial numbers are available. Each Speed Dial number can
be up to 25 digits in length and may include special instruction codes.
Special instruction codes available are:
‘*’ as 1st digit Activate Display Security.
‘*’ not 1st digit Switch from Pulse to DTMF dialing.
[DND] Insert a Flash command.
Flash as 1st digit
Activate dial tone detect.
[MESSAGE/CALLBACK] as 1st digit Activate ISDN Keypad Facility
[MESSAGE/CALLBACK]
Insert a pause dialing command.
You may assign a Flex button of your iPECS IP or LDP Phone for One-Touch access to a
specific System Speed Dial bin.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [SPEED] + System Speed Dial bin number +
[HOLD/SAVE]
To assign a Flex button as a {SPEED} button for a System Speed Dial