iPECS UCP
Feature Description and Operation Manual Issue 1.3
287
3.10.3 Short Message Service (SMS)
Description
The Short Message Service (SMS) provides the ability to send and receive text messages to
and from iPECS IP and LDP Phones equipped with a display as well as the UCS Client,
DECT and WLAN Phones. The text is comprised of words, numbers, or an alphanumeric
combination. Each short message can be up to 100 characters in length when Latin
alphabets are used.
You send and receive messages from your iPECS IP or LDP Phone, or the Station Web
Portal of the iPECS system. For operation using the Station Web Portal, see your System
Administrator.
Operation
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “36” + [HOLD/SAVE]
To assign a Flex button as a {SMS SEND} button
1. Press the [TRANS/PGM] button.
To resend an existing SMS message
2. Dial “36”, the SMS send code.
SMS SENDING MODE
RESEND-(1) EDIT-(2)
3. Dial “1” to resend a message.
DIAL STA DEST(XXX-XXX)
SKIP-(*)
4. Dial the desired station range to receive the message or “*” to use the displayed
station range.
STA 100-124
SEND-(SAVE) CANCEL-(#)
5. Press the [HOLD/SAVE] button to send the message or “#” to cancel.
1. Press the [TRANS/PGM] button.
To send a new message
2. Dial “36”, the SMS send code.
SMS SENDING MODE
RESEND-(1) EDIT-(2)
3. Dial “2” to send a new message.
DIAL STA DEST(XXX-XXX)
4. Dial the desired station range to receive the message.
STA 100-124
SEND-(SAVE) CANCEL_(#)
To Next Page
Loading...
