iPECS UCP
Feature Description and Operation Manual Issue 1.3
330
4.21 Private Line
Description
Your iPECS IP or LDP Phone can be assigned exclusive use of one or more outside Lines.
These “Private” lines are assigned to a special Line Group (group 000). To use a Line from
this group, your phone must be assigned a Flex button for the outside Line appearance.
Operation
iPECS IP & LDP Phones
1. Press the {LINE} button assigned as the Private line, dial tone is received from the
Line.
To place an outgoing Private line call
2. Dial the desired number.
1. Press the flashing{LINE} button.
To answer an incoming Private line call
Conditions
1. Private lines will not recall to the Attendant station.
2. Private lines are not subject to Call Pick-Up except by an assigned Secretary with
an appearance of the Private line.
3. When put on hold, a Private line will recall the user after the appropriate Hold timer.
The user will receive recall for the Hold Recall time, and, if still unanswered, the
user will continue to receive recall for the Attendant Recall time. If the call remains
unanswered, at expiration of the Attendant Recall time, the call will be
disconnected and the Private line returned to idle.
4. A Private line will follow Call Forwarding only if the receiving station has an
appearance ({LINE} button) for the Private line. However, calls on a Private line
can forward to the Voice Mail permitting the caller to leave a voice message.
5. IP channels cannot be assigned as Private lines.
Programming
To Next Page
Loading...
