iPECS UCP - 5.3 Automatic Speaker Select

iPECS UCP
Feature Description and Operation Manual Issue 1.3
334
5.3 Automatic Speaker Select
Description
The iPECS IP and LDP Phones programmed for Auto Speaker Select can access an outside
Line or an internal call by pressing the appropriate button without the need to lift the handset
or press the[SPEAKER] button. Audio from the call is sent to the speaker and the
microphone is active, as if you pressed the [SPEAKER] button to answer the call. This is
useful if you are receiving a call but want to place a call instead of answering the ringing call
or if you have multiple calls ringing at your phone, you can select the call to answer.
Operation
iPECS IP & LDP Phones
1. Press a {FLEX} button for the Line or station.
To access an internal or external system resource
Conditions
1. For iPECS IP and LDP Phones not equipped/assigned with speakerphone, the
user must lift the handset to be heard.
2. Paging while on the speakerphone will cause feedback from other nearby phones
or the local paging equipment. If Auto Speaker is enabled and a {PAGE ZONE}
button is pressed, the display will show "LIFT THE HANDSET". To complete the
page, the user must lift the handset within the predefined 5-second period or return
to idle.
Programming
STATION DATA Terminal Attributes Auto Speaker Selection,
Speakerphone
Related Features
Hardware
 iPECS IP or LDP Phone