iPECS UCP - 2.18 Call Pick-Up; 2.18.1 Directed Call Pick-Up

iPECS UCP
Feature Description and Operation Manual Issue 1.3
58
2.18 Call Pick-Up
2.18.1 Directed Call Pick-Up
Description
You may answer (“Pick-Up”) incoming and transferred intercom and outside calls ringing at
another station. All ringing calls are subject to Directed Call Pick-Up except Private Line calls,
queue Callbacks and recalls from hold.
iPECS IP and LDP Phone users may assign a Flex button as a {DIRECTED CALL PICK-UP}
button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “*77” + [HOLD/SAVE]
To assign a {DIRECTED CALL PICK-UP} button
1. Lift the handset or press the [SPEAKER] button.
To Pick-up a call ringing at another station
2. Dial “*77”, the Directed Call Pick-Up feature code.
3. Dial the number of the ringing station.
Or,
1. Lift the handset or press the[SPEAKER] button.
2. Press the {DIRECTED CALL PICK-UP} button.
3. Dial the ringing station’s intercom number.
SLT
1. Lift the handset.
To Pick-up a call ringing at another station
2. Dial “*77”, the Directed Call Pick-Up code.
3. Dial the number of the ringing station.
Conditions
1. To pick-up an outside call, you must have an idle appearance button available.
2. When several calls are ringing at a station simultaneously, Call Pick-Up will
connect the oldest highest priority call (System Data Ringing Line Preference
Priority).
3. Queue callback and Private Line calls are not subject to Call Pick-Up and such
attempts receive error tone.
4. Hands free announced intercom calls cannot be picked up by another station. Only
ringing intercom calls are subject to Call Pick-up.