iPECS UCP - CO Line Release Guard Time

iPECS UCP
Feature Description and Operation Manual Issue 1.3
302
4.4 CO Line Release Guard Time
Description
To assure that the service provider’s switching equipment has sufficient time to restore to the
idle condition, the system will hold analog CO Lines in a busy state after you release the Line.
The time between the disconnect and when the system changes the CO Line status from
busy to idle is the CO Line Release Guard time.
Operation
System
Conditions
Operation of this feature is automatic.
Programming
SYSTEM DATA
System Timers

CO Release Guard Timer
Related Features
Hardware
 Analog CO Line